Nadajnik GEPRC RAD VTX 5.8G 1.6W

I’m glad to introduce the newly developed RAD VTX 1.6W by GEPRC.It is a super-power VTX with a maximum power of  1600MW and five adjustable gears:Pit/25mW/200mW/600mW/1600mW is adopted.The RAD adopts a double-layer PCB  design to separate the power supply from the main-board,which can reduce and shield interference. Double layer structure for better heat dissipation. The built-in microphone on the VTX board,supports 7-36V voltage(2-8S Battery) input,  uses the mainstream MMCX connector ,and the mounting hole is 30.5×30.5mm.

Feature:

1. 1600mW Super power ,Suitable for Long Range flight with good stability.
2. Five power channel: PIT mode/25mW/200mW/600mW/1600mW.
3. Two-layer board cooling structure,Separate power BEC and main-Board,Reducing and shielding from the insinal interference.
4. Temperature control protection function that can prevent high temperature burning
5. Wide voltage input, Supports 7V-36V Voltage input.
6. VTX control protocol is IRC Tramp,supports OSD parameter adjustment.
7. VTX built in microphone,Real-time transmission of Drone’s sounds.
8. Has 3 regional frequency tables to meet the needs of various regions.
9. Two function buttons, three indicator lights, easy to control.
10. Mounting hole is 30.5mmx30.5mm.

Specifications:

• Model: GEPRC RAD VTX 5.8G 1.6W
• Input voltage: DC 7-36V(2-8S Battery)
• Output: 5V@600mA(power 5V to Camera)
• Input impedance: 75Ω
• Protocol: IRC Tramp
• Antenna interface: MMCX
• Output power: PIT mode/25mW/200mW/600mW/1600mW PIT MODE
• Frequency tables: Universal frequency table(40CH),American FCC frequency table(37CH),European EU frequency table(26CH)
• Video format: PAL / NTSC
• Microphone: Built in microphone
• Size: 36×36.5×5.5mm
• Weight: 9.7g(without cable)
• Mounting hole: 30X30mm(M3)

Warning：

1. Install Antenna before use.
2. To prevent overheating,provide constant airflow and a well ventilated environment.Install a cooling fan if operating in confined conditions.
3. The 5V Output is for a Camera/Cooling Fan use only!Do not connect Power Input/Battery to 5V Out. Serious damage will occur to VTX.

Connector definition description:

• DC 7-36V: Input 2-8s Battery power
• GND: Common ground wire
• Video: connect to the video output port of FC or Camera
• IRC: Connect to UART TX port of FC
• 5V OUT: output 5V power to the Camera
• GND: Common ground wire

Description of button and indicator light:

• Two function button are parallel in the VTX circuit, and the operation and function are the same
• Blue light: Ch indicator
• Green light: Band indicator
• Red light: Power indicator

Includes:

• 1 x GEPRC RAD VTX 5G8 1.6W
• 1 x 72mm MMCX Copper tube antenna
• 1 x GH 1.25*6P 150mm Connecting cable
• 1 x MMCX to SMA（Internal foramen）connector
• 1 x Matching screw package.

Size:

Include:

Manual

RAD VTX 5.8G 1.6W Manual.pdf

FAQ

Click here to View Possible problems in use